Equipment - Electrolux IK295SAR Benutzerinformation

Equipment

You can re-arrange the storage
shelves as required.
Lift the glass shelf, align the recess
over the support and replace the
shelf in a higher or lower position.
Sectioned shelf
If you need to make space for
tall containers, simply slide
the front half of the sectioned
glass shelf carefully under-
neath the back half.
Adjusting the insertion
height of the sectioned
shelf
Remove the supporting strips
and place on the supports
above or below the previous
position.
Repositioning the door racks
Lift door rack vertically, lift out to the front and
re-insert at a different height, following these
steps in the reverse order.
66
Removing the drawer
Pull the drawer out as far as it will go,
lift slightly at the back and remove.
Inserting the drawer
Extend the pull-out rails as far as
they will go. Place the drawer on
the rails and slide it right in.
Removing the basket holder
Pull the basket holder out as far as it will go, lift slightly at the
back and remove.
Inserting the basket holder
Extend the pull-out rails as far as they will go. Place the basket
holder on the rails and slide it right in.
Bottle holder
Slide bottle holder to prevent bottles
from falling over.
Bottle basket
Pull the basket holder towards
you. Remove the bottle basket.