Identification Of Main Components; Identification Plate - Stiga PRS 1501 Gebrauchsanweisung

39
EN

1. IDENTIFICATION OF MAIN COMPONENTS

MAIN COMPONENTS
1. Starter unit
2. Connecting rod
3. Chain catcher
4. Bar
5. Chain
6. Bar cover
7. Chain oil tank cap

IDENTIFICATION PLATE

11. Name and address of the manufacturer
12. Type of machine
13. Sound power level
14. Year of manufacture
15. Serial number
16. Article code
17. CE conformity marking
18. Maximum rotational frequency of the spindle
2. SYMBOLS
1 2
WARNING: The machine you have purchased has been manufactured for domestic use.
1) Warning! Danger.
2) Read the instruction booklet before using this
machine.
3) Your hearing is at risk of irreparable damage.
Anyone operating this machine under normal con-
ditions during continuous daily use may be expo-
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
3 4
6
5 4 7
3
11 12
Type:
Max rotational frequency of the spindle:
Pruner Saw Attachment
Art.N.
- s/n
14 16
The example of the Declaration of Conformity is
provided on the penultimate page of the manual.
sed to a noise level equal to or exceeding 85 dB
(A). The operator must wear Personal Protective
Equipment (PPE). Whenever the machine is in
use, safety goggles must be worn to safeguard
against flying objects, as must ear protectors, such
as a soundproof helmet, in order to protect the
1
2
18 13
m/s
15
17
6
5