Function Check - Hella KLED 2.0 Montageanleitung

LAMP
SYNCHRONIZATION
1. Program each lamp individually
with the desired fl ash pattern as de-
scribed in the "Programming Mode"
instructions. (We recommend
selecting the same fl ash pattern for
all lamps to be synchronized.)
2. Connect the lamps as specifi ed in
the circuit diagram. Here, all yellow
lines are connected to one another.
17

FUNCTION CHECK

Mandatory for all
emergency vehicles
(police, fire depart-
ment, etc.)
+
–
white
yellow
The function check indicates that
the lamp operates properly. In the
case of a defective LED
or any other malfunctions, the
control lamp will go out.
+
30
–
31
black
...
...
+
–
–
31
red
max 0,5A/5W