Maintenance And Storage - FLORABEST FARM 40-Li A1 Bedienungs- Und Sicherheitshinweise

11. Switch on the motor
carefully according to
instructions and with
feet well away from the
blade(s).
12. Do not tilt the product when
switching on the motor,
except if the product has to
be tilted for starting. In this
case, do not tilt it more than
absolutely necessary and lift
only the part, which is away
from the operator.
13. Do not start the product
when standing in front of the
discharge opening.
14. Do not put hands or feet
near or under rotating parts.
Keep clear of the discharge
opening at all times.
15. Do not transport the product
while the power source is
running.
16. Stop the product, and
remove the disabling device.
Make sure that all moving
parts have come to a
complete stop:
whenever you leave the
¢
product,
before clearing blockages
¢
or unclogging chute,
before checking, cleaning or
¢
working on the product,
after striking a foreign
¢
object. Inspect the product
for damage and make
repairs before starting and
operating the product.
If the product starts to
vibrate abnormally (check
immediately):
inspect for damage,
¢
replace or repair any
¢
damaged parts,
check for and tighten any
¢
loose parts.

Maintenance and storage

1. Keep all nuts, bolts and
screws tight to be sure the
product is in safe working
condition.
2. Check the grass collector
frequently for wear or
deterioration.
3. On products with multi
blade, take care as rotating
one blade can cause other
blades to rotate.
4. Be careful during adjustment
of the product to prevent
entrapment of the fingers
between moving blades and
fixed parts of the product.
5. Always allow the product to
cool down before storing
GB 11