Switching On And Off; Mowing; After Use; Cleaning And Care - FLORABEST FARM 40-Li A1 Bedienungs- Und Sicherheitshinweise

Switching on and off

Q
Switching on:
1. Operate the lock-off button
position (see Fig. K).
2. Pull the on / off switch
handle to switch on. Release the lock-off
1
button .
15
Switching off:
1. Release the on / off switch

Mowing

Q
WARNING! RISK OF INJURY!
If the product strikes a foreign object stop
u
the motor! Switch the product off, remove
the battery pack, disengage the safety key
and let it cool down. Inspect the product
thoroughly for damage! Have any damage
repaired before restarting!
Extensive vibration of the product during
u
operation is an indication of damage! Stop
the motor. The product should be promptly
inspected and repaired!
WARNING!
In some countries regulations define at
u
what time of the day and on what special
days products are allowed to be used and
what restrictions apply! Ask your community
for detailed information and observe the
regulations in order to preserve a peaceful
neighbourhood and avoid committing
administrative offences!
Make sure that the lawn is clear of stones,
o
sticks, wire or other objects that could
damage the product or its motor.
Do not cut wet grass because it tends to stick
o
to the underbody of the product, preventing
the proper discharge of grass clippings, and it
could also cause you to slip and fall.
Never cut off more than one-third of the total
o
length of the grass for a healthy lawn. In the
autumn, lawns should only be cut as long as
there is growth.
Slowly push the product forward.
o
and hold it in
15
towards the
16
to switch off.
16
Mow in slightly overlapping rows. The most
o
effective pattern for mowing lawns is straight
lines along one of the sides. This will keep the
rows even and ensures that all the lawn is cut
without missing any spots.
Circle around flower beds. When reaching
o
a flower bed in the middle of the lawn, cut a
row or two around the circumference of the
bed.
Pay special attention when changing
o
direction.
Empty the grass collector
o
Switch the product off immediately if you
o
are disturbed while working by other people
entering the working area. Always let the
product come to complete stop before
averting.
Do not overwork yourself. Take regular breaks
o
to ensure you can concentrate on the work
and have full control over the product.

After use

Q
1. Switch the product off, remove the battery
pack , disengage the safety key
17
let it cool down.
2. Check, clean and store the product (see

"Cleaning and care").

Cleaning and care
Q
WARNING!
Always switch the product off, remove
the battery pack and let the product
cool down before performing inspection,
maintenance and cleaning work!
CAUTION! RISK OF INJURY!
The blade(s) are sharp! Always wear
protective gloves when performing
inspection, maintenance and cleaning
work!
regularly.
11
and
7c
GB 17