Specifications - Makita 6825R Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Locking sleeve
2-1. Locator
3-1. Locator
4-1. Switch trigger
4-2. Lock button

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-1. Reversing switch lever
6-1. Hook
8-1. Locator
8-2. Locking sleeve
9-1. Locator
Model
Self drilling screw
Drywall screw
-1
)
Overall length
Net weight
Safety class
) : 82 dB(A)
pA
) : 93 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
6823
6 mm
6 mm
0 - 2,500
301 mm
1.6 kg
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENF002-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG102-2
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Drywall Screwdriver
Model No./ Type: 6823,6824,6825,6825R
are of series production and
ENG204-2
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
sum)
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
ENG901-1
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
9-2. Bit
9-3. Magnetic bit holder
11-1. Lock button
13-1. Lock button
6824 6825
6 mm -
5 mm 4 mm
0 - 4,500 0 - 6,000
290 mm 290 mm
1.5 kg 1.5 kg
/II
Corporation as the
6825R
-
4 mm
0 - 6,000
290 mm
1.5 kg
ENH101-12
responsible