Technical Information - IKEA KULINARISK Gebrauchsanleitung

ENGLISH
Problem
The lamp does not operate.
The display shows F111.
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical information

Technical data
Dimensions (internal)
Possible cause
The lamp is defective.
The plug of the core temper-
ature sensor is not correctly
installed into the socket.
There is an electrical fault.
You left the dish in the oven
for too long.
We recommend that you write the data here:
Replace the lamp.
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
an Authorised Service
Centre.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Width
Height
Depth
27
Remedy
480 mm
361 mm
416 mm