Disposal - Kummert Profi HD Bedienungsanleitung

Check if all screws are present and tight
Make sure that all connectors are clean and dry
Make sure that the device is not damaged
Clean the device (see above. „Cleaning")
In case of damage and missing components, please contact certified service partner or the
manufacturer.
Phone:
E-Mail:

DISPOSAL

NOTE
Danger to environment!
Incorrect disposal may cause dangers to the environment.
• Electrical waste, electronic components, lubricants and other substances may only
be disposed of by certified specialist companies.
• When in doubt, ask for information on environmentally safe disposal at your local
authorities or specific waste management companies.
When the device has reached the end of its useful life, it has to be disassembled and
disposed of in an environmentally safe manner.
Unless both parties agreed otherwise on recycling or disposal, all components must be
properly dismantled and recycled by the owner as follows:
• Scrap any metal parts.
• Recycle any plastic parts in the appropriate manner.
• Dispose of all other components separately depending on the nature of material.
EN
+49 (0) 9382 9727 - 710
service@kummert.de
x x
x x
x x
x
x
x
39 39