Operating The System (Quick Reference) - Ten-Haaft SamYSolar Montageanleitung

Operating the system (quick reference)

a) Satellite reception
1. Switch on your TV set and the receiver and select a receivable programme at
the receiver.
2. Press at the control panel to switch on the system.
That's all you have to do – anything else required to receive a TV image will happen
automatically.
The antenna will always move into the last reception position.
If you use the system for the first time or if you have moved the system to a diffe-
rent location, the system will not receive a signal in this position and hence starts
the „automatic search". This will soon yield a TV picture.
If you have used the system at the same location and in the same vehicle position
before, then it will immediately receive signals without a prior search.
English-language channels are mostly transmitted via Astra II, which can be recei-
ved in most parts of Europe with a 85-cm parabolic antenna.
In some regions (e.g. in Greece, Turkey) the Astra signals are too weak to be recei-
ved. In this case, select a different search satellite such as Hotbird/Eutelsat (see
comprehensive Operating Instructions).
Once the satellite has been found, you can select channels with the remote control
of your receiver.
To switch off the system, press
and the system will switch off.
at the control panel. The antenna will retract
44
E