Technical Data; Environment Concerns - Pelgrim GVW5820NY Benutzerinformation

Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function button (B) and
function button (C) at the same time un-
til the indicators of function buttons (A),
(B) and (C) flash.
3. Release function button (B) and function
button (C).

Technical data

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,

Environment concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
Possible cause
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
4. Press function button (B).
• The indicators of function button (A)
• The indicator of function button (B)
5. Press function button (B) again.
• The end indicator comes on. The
6. Deactivate the appliance to confirm.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Possible solution
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
and function button (C) go off.
continues to flash.
rinse aid dispenser is active.
0.5 bar (0.05 MPa)
35
596 mm
818 - 898 mm
550 mm
8 bar (0.8 MPa)
maximum 60 °C
12