Panasonic ES8249 Bedienungsanleitung Seite 11

2. Clean the inner blades using the short
brush by moving it in direction (A).
Clean the system outer foil, the shaver
body and the trimmer using the long
brush.
• Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
• Do not use the short brush to clean
the outer foils.
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
. Raise the trimmer and apply a drop of
oil.
4. Switch the shaver on, and run it for
approximately five seconds.
. Switch off the shaver, and wipe off any
excess oil from the outer foils with a
soft cloth.
• It is not necessary to oil the blades after using the self-
cleaning recharger (lubricant is included in the cleaning
detergent).
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
• Press the OFF/ON switch for more than 0 seconds to delete
.
(A) (B)
1. Press the system outer foil release buttons and lift the
system outer foil upwards.
2. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the inner blades to
prevent injury to your hand.
. Insert the inner blades one at a time until they click.
4. Insert the system outer foil by pushing it downwards until it
clicks.
Cleaning the self-cleaning recharger
Beard trimmings may become attached
to the cleaning tray of the self-cleaning
recharger. Follow the steps below to
remove them. We recommend doing this
each time you change the detergent
cartridge.
1. Be sure to remove the water tank and
the appliance plug from the self-
cleaning recharger.
• Be careful not to spill the cleaning
liquid.
system outer foil
inner blade
1
2 3
once every year
once every two years
4
11
GB