Yamaha WaveRunner series Zusammenbauanleitung Seite 24

EXPLODED DIAGRAM
Step Procedure/Part name
4 Throttle cable
Q'ty
1
Installation steps:
• Install the throttle cable end into the throt-
tle lever.
• Fit the seal 1 into the groove in the
bracket.
• Turn the adjuster 2 in/out until the speci-
fied free play is obtained.
Throttle lever free play e:
4–7 mm (0.16–0.28 in)
Turn in
Turn out
• Tighten the locknut 3.
– 7 –
Service points
Free play is increased.
Free play is decreased.
E