Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha WaveRunner series Zusammenbauanleitung Seite 40

Inhaltsverzeichnis

Werbung

• Remove the oil tank filler cap 1, wipe the
dipstick 2 clean, and then screw the filler
cap into the filler hole completely.
• Remove the filler cap again to check the
oil level is between the minimum level
mark a and maximum level mark b on
the dipstick.
• If the engine oil is below the minimum
level mark a, add sufficient oil of the rec-
ommended type to raise it to the correct
level.
• If the engine oil is above the maximum
level mark b, extract sufficient oil using
an oil changer to lower it to the correct
level.
NOTE:
If the oil temperature is low, the reading on
the dipstick will be low, and if the tempera-
ture is high, the reading on the dipstick will
be high.
• Be sure to remove the oil notification tag
3 from the air cleaner case cover after
checking the engine oil level.
– 15 –
E

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Waverunner fx160Waverunner fx160 cruiser

Inhaltsverzeichnis