Exploded Diagram - Yamaha WaveRunner series Zusammenbauanleitung

EXPLODED DIAGRAM

Step Procedure/Part name
7 Washer
13 × 6 mm (0.51 × 0.24 in)
8 Spring washer
9 Screw
6 × 65 mm (0.24 × 2.56 in)
10 Spacer
8 × 6 × 22 mm
(0.31 × 0.24 × 0.87 in)
11 Grip end
Bolt 5 × 35 mm (0.20 × 1.38 in)
12
13 Throttle cable
(with corrugated tube)
Q'ty
NOTE:
1
• Route the QSTS 1 cables through the port
side in the steering console.
1
• Route the handlebar switch lead 2, buzzer
1
lead and throttle cable through the starboard
side in the steering console.
1
• Position the corrugated tube for the throttle
cable as shown in the illustration so that the
tube attaches to the end of the outer throttle
1
cable.
1
1
– 5 –
Service points
E