Laser 3D Condtrol - CONDTROL Laser 3D Bedienungsanleitung

CROSS-LINE LASER
Warranty: The warranty period is 1 years from the date of purchase. The
warranty covers all material or manufacturing defects occurring during this time.
The following are excluded from warranty: Damage due to improper use (e.g.
operation with wrong type of current/voltage, connection to unsuitable power
source, fall onto hard surface, etc.) or improper storage, normal wear and tear,
and defects which only insignificantly impair the value or suitability for use. Any
tampering by unauthorised persons will render this warranty void. In the event
that you need to claim warranty, please take the complete device together with
all information and the invoice to one of our dealers or send it in to CONDTROL.

LASER 3D CONDTROL

Laser 3D CONDTROL
1 Laser output windows
2 Battery compartment
3 Tripod/wall bracket with 63 mm
height adjustment
4 ON / OFF switch, transport
retainer
5 Laser line selection button
6 Height adjustment knob
7 Magnetic pin for unit centring
8 Special pins for direct attachment
to a wall
9 Holding magnets on the back-side
for attachment to magnetic-
responsive objects
10 5/8'' tripod threads with threaded
bush insert for 1/4'' photo-tripod
threads
11 Tilt function indicator LED10
User Manual
13