COCKPIT & RUMPFDECKEL / COCKPIT & HATCH
DRAUFSICHT TOP VIEW
Verriegelung
Locker
www.pichler-modellbau.de
Position the canopy so the rear frame on the
canopy is aligned with the rear edge of the cockpit
opening. Use canopy glue to secure the canopy to
the canopy hatch. Use low-tack tape to hold the
canopy in position until the glue fully cures. Wrap
the tape completely around the canopy hatch.
Verwenden Sie zum Verkleben der
Kabinenhaube den Ruderer L 530
Kunststo klebsto , Art.-Nr. X3583
29