Honda EU30i Bedienungsanleitung Seite 45

11/05/10 11:32:14 32Z28610_045
3. Wash the elements in a solution of household detergent and warm
water and rinse thoroughly, or wash in nonflammable or high flash
point solvent. Allow the elements to dry thoroughly. If the elements
are damaged, replace them.
4. Soak the elements in clean engine oil and squeeze out the excess oil.
1. Soak
5. Make sure that the rubber seal is set in the groove of the air cleaner
case. Replace the rubber seal if it is damaged.
6. Reinstall the main and outer elements. Put the outer element
between the upper and lower ribs.
7. Reinstall the air cleaner cover and tighten the air cleaner cover
screw securely.
2. Squeeze to Dry
Do not twist
AIR CLEANER CASE
3. Oil 4. Squeeze
Do not twist
RUBBER SEAL
RIBS
43