Honda EU30i Bedienungsanleitung Seite 43

11/05/10 11:32:01 32Z28610_043
3. Open the oil drain plug cover from the bottom of the generator.
4. Place a suitable container under the oil drain plug.
5. Remove the oil drain plug and sealing washer with the supplied box
wrench and wrench handle, and drain the oil into the container
thoroughly.
6. Reinstall the oil drain plug and a new sealing washer. Tighten the
plug securely.
7. Close the oil drain plug cover.
8. With the generator in a level position, refill with the recommended
oil (see page
9. Wipe off all the spilled oil from the generator.
10. Reinstall the oil filler cap and close the oil maintenance cover.
SEALING WASHER
(Replace)
OIL DRAIN PLUG
BOX WRENCH
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
16 ) to the upper level of the oil filler neck.
OIL FILLER CAP
OIL DRAIN PLUG COVER
WRENCH HANDLE
41