Herunterladen Inhalt Inhalt Diese Seite drucken

Stiga 100 COMBI 3 Gebrauchsanweisung Seite 24

Schneideplatte
Vorschau ausblenden Andere Handbücher für 100 COMBI 3:
Inhaltsverzeichnis

Werbung

EN
The machine may not be driven on slo-
pes greater than 10º (17%), in any di-
rection.
Remember there is no such thing as a
"safe" slope. Travel on grass slopes re-
quires particular care. To avoid roll-over
of losing control of the machine:
a. do not stop or start suddenly when going up
or downhill;
b. engage the drive slowly and always keep the
machine in gear, especially when travelling
downhill;
c. machine speeds should be kept low on slo-
pes and during tight turns;
d. Beware of humps, hollows and other hidden
dangers;
e. Never mow across the face of the slope.
When mowing on a slope, proceed up and
down the slope as opposed to across it, ta-
king great care when changing direction that
the first wheels do not hit obstacles (such
as stones, branches, roots, etc.), that may
cause the machine to slide sideways, roll
over or otherwise cause loss of control.
Reduce speed before any change of
direction on slopes and always enga-
ge the parking brake before leaving the
machine stopped and unattended.
exercise caution in the proximity of clif-
fs, ditches or embankments. The machi-
ne may overturn if a wheel drives over
the edge or the edge gives way.
Exercise maximum caution when re-
versing and working in reverse. Look
behind you both before and during re-
versing to make sure there are no ob-
stacles.
Use care when pulling loads or using
heavy equipment:
a. use only approved drawbar hitch points;
b. limit loads to those you can safely control;
c. Do not make any sudden turns. Use care
when reversing;
d. use counterweight(s) or wheel weights whe-
never advised in the instructions manual.
Disengage the cutter blade or PTO and
lift the cutting deck assy to its highest
position when crossing grass-free are-
as or when moving from one area to
another.
6
ENGLISH
(Translation of the Original Instructions)
Look out for traffic when using the ma-
chine near the road.
CAUTION! The machine has not been
approved for use on public roads. It has
to be used (as indicated by the highway
code) in private areas closed to traffic.
Never use the machine if the safe-
guards are damaged.
Do not put hands or feet near or under
rotating parts. Keep clear of the di-
scharge opening at all times.
Do not leave the machine on high grass
with the engine running to avoid the
risk of starting a fire.
When using accessories, always direct
the discharge chute away from people.
Only use accessories approved by the
machine manufacturer.
Do not use the machine if the accesso-
ries/tools are not installed in the correct
places. Driving without accessories
may adversely effect machine stability.
Take care when using grass collectors
and other accessories which may alter
machine stability, especially when wor-
king on a slope.
Do not change the engine governor set-
tings or overspeed the engine.
Do not touch engine components which
get hot during use. Burns hazard.
Disengage the cutter blade or the PTO,
set the engine to the idle position, stop
the engine and remove the key (make
sure that all moving parts have come to
a complete stop):
a. whenever you leave the machine unattended
or leave the driver'r seat.
b. before removing the jamming cause or un-
clogging the collector channel;
c. before checking, cleaning or working on
machine;
d. after striking a foreign object. Inspect the ma-
chine for damage and make repairs before
restarting and operating the machine;
Disengage the cutter blade or the PTO
and stop the engine (make sure that all

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

100c e

Inhaltsverzeichnis