Hardware Connections - ZyXEL NBG-318S Schnellstartanleitung

1 Hardware Connections

Do the following to make hardware connections for initial setup.
1
WAN
Connect your modem to the WAN port using the cable that came with your
modem.
2
LAN
Connect your computer to a LAN port using the yellow Ethernet cable from the
package.
3
POWER Connection
Use the power cord from the package to connect the POWER socket to an appro-
priate power source. This is also your powerline connection.
The LEDs
Look at the LEDs (lights). When you connect the power, the POWER (
stays on once the device is ready.
The LAN (
ENGLISH
) LEDs turn on if the LAN connections are properly made.
3
) LED blinks and