Hardware Connections - ZyXEL NBG334S Handbuch

1 Hardware Connections

Do the following to make hardware connections for initial setup.
1
WAN
Connect your modem to the WAN port using the cable that came with your modem.
2
LAN
Connect your computer to a LAN port using the yellow Ethernet cable from the
package.
3
POWER Connection
Use the power adapter from the package to connect the POWER socket to an
appropriate power source.
The LEDs
Look at the LEDs (lights). When you connect the power, the power LED (
stays on once the device is ready.
The LAN (
are properly made.
ENGLISH
) and WAN ( ) LEDs turn on if the corresponding connections
3
) blinks and