Symbol LS1900 series Kurzübersicht Seite 35

Q u i c k
Programming Bar Codes
Following are some frequently used programming bar
codes.
Note:
Set Defaults
Scanning this bar code sets all parameters to their default
values.
Host Type
If you are using a Synapse cable (e.g., a part number
STIxx-xxxx), the scanner autodetects the type of host you
are using, so you do not need to scan bar codes. If not,
select an RS-232, Keyboard, or Wand host from the
following bar code menus.
RS-232 Host Types
STANDARD RS-232C
R e f e r e n c e
For additional host types, refer to the
LS1900 Series Product Reference Guide,
p/n 72-50930-xx, available on the LS1900
Series CD.
SET DEFAULTS
ICL RS-232C
33