Jacuzzi sasha Vorinstallationsblatt Seite 11

The installation of electrical devices and equipment (sockets,
switches, etc.) in the bathroom must be in compliance with legal
standards and regulations in the country where the appliance is
installed.
To connect the building's electrical system, you must use a
cable protected with a sheath with characteristics not inferior to
H 07 RN-F and with a suitable cross section (220-240 V ~: min.
6 mm2; 380-415 V 2-3N ~: min. 2.5 mm
The building's electrical system must be equipped
with a 0.03 A differential switch.
In order to carry out the equipotential connection as specified
in the specific national standards, the installer must use the ter-
minals provided on the frame of the "shower" module and on
the "hammam" module, identified by the symbol .
In particular, it is necessary to ensure that all the surrounding
metal masses are equipotential. (standard EN 60335.2.105).
The appliance is equipped with an LED lighting system in
compliance with Norm EN 62471:2009; lamp rating: exempt
Group.
Do not look directly at the light using optical devices (bin-
oculars, cameras, magnifying glasses).
2 ).
11