Initial Use; Menu Overview - auna Connect 90 Handbuch

• Use the supplied mains adaptor to connect the device to a household mains socket
• Switch the device on with the power switch on the rear. The press STANDBY on the front to wake the
device up from standby mode.
• When it is the first time running the device, the system will ask you to set Language and Network
Configurations. You may setup the network connection immediately, or set it later. Use NAV (=rotate to
scroll) to select the desired option. Press NAV/OK to confirm.
• Press STANDBY for standby. Date and time, as well as alarms - if activated - will still be shown on the
display when in standby mode.
• Tips: When you need input the internet password, please press Navigate button to choose the chara
cters.In this condition,press Back button can turn left and delete the left characters at the same time:
Note: Below characters are available for the radio:
• Numbers (from 0-9)
• English letters (from A to Z and from a to z)
• Other characters (DEL,@,Blank,!,",#,$,%,&,*,',+ and (,).
Standby
Main menu
Configuration
18

Initial Use

Menu: Overview
Internet Radio | Media-Center | Informations-Center | AUX | Configuration
Time Display
<-->
Manage my mediaU
Network
Date&Time
Alarm
Analog / digital
<-->
Wireless Network | Manual Config
<-->
Check Net when PwR on
Set Date/Time | Time Format | Date
<-->
Alarm 1 (I/O) | Alarm 2 (I/O)
<-->
Nap-Alarm (I/O) | Alarm Volume.
Format