auna Connect 90 Handbuch Seite 23

Alarm
Timer
Language
Dimmer
Display
Power Mgmt
Sleep Timer
Buffer
Weather
There are three independent alarms - 2 alarms of absolute time setting (Alarm 1
and Alarm 2) and 1 alarm for relative time setting (Alarm NAP). Press Alarm on the
remote control to enter this menu directly.
Note that the alarm source is from the preset Internet radio if Alarm Sound is set
to be Internet Radio. It can only set one same IR station for Alarm 1 and Alarm 2.
When the alarm time is reached, the unit connects to the Internet if the set network
is available. Therefore there may be some delay from the alarm to the radio play.
If no network is connection can be established within one minute, the alarm will
change to Melody automatically.
When Alarm NAP is set, it alarms once in 5/10/20/30/60/90/120 minutes depen-
ding on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Countdown timer (max. 100min)
English / Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano/
Pyccknn / Svenska / Norske / Dansk / magyar / Cesky / slovensky / polski / Turkce
/ Suomi
Active / Save energy
colored/monochrome
Configure to go to standby mode automatically during in the menu or/and without
Wifi signal. Choose the power management timer (5/15/30mins) to set the durati-
on of the radio to switch standby mode automatically when you are not controlling
it. Choose Turn off to ignore the power management function.
Turn off or set the sleep time of 15/30/60/90/120/150/180 minutes. Once the time
is set, there will be a bed icon with remaining minutes at the top right corner and
the device will turn to standby then. Press Sleep on the remote control for the
shortcut of this function.
Configure the buffer time of the music playback, 2/4/8 seconds.
Activate/deactivate the weather forecast for the standby display. Choose your pre-
ferred temperature unit (°F or °C) and then proceed entering your location. When
activated, the weather forecast is shown in turns with the clock display on the
standby screen (each 10 secs).
23