Bartscher 600 series Bedienungsanleitung Seite 29

SUBSTITUTING COMPONENTS
ATTENTION! Before carrying out any substitutions, make sure that the appliance is
disconnected from the electric mains.
Heating elements (fig.6 – page 5)
In order to replace the heating element, the following steps should be carried out:
- Make sure that the cooking vat has been completely drained;
- Take off the knobs (1) and (2);
- Unscrew the drain valve (3);
- Take out the front panel (4) by unscrewing the two screws below;
- Disconnect the wiring from the heating element;
- Unscrew the two hexagonal nuts (5) that fix the heating element;
- Take off the heating element from the inner part of the cooking vat (6).
After replacing the heating element, carry out the same procedure in reverse order.
Information for electrical and electronic devices used in EU countries
According to EU directives, devices marked with the following symbol may not be disposed
of together with normal household waste.
To dispose of your used device, please use the locally available differentiated collection system or
consult your retailer when you buy an equivalent product.
By actively using the provided collection systems, you are contributing to the reuse, recycling and
enhancement of electrical or electronic devices and protecting the environment and health.
Abusive product disposal is punishable by law in accordance with current legislation
WHEN SUBSTITUTING, ONLY ORIGINAL SPARE PARTS SUPPLIED BY THE
MANUFACTURER MUST BE USED. THE OPERATION MUST BE CARRIED OUT BY
AUTHORIZED PERSONNEL.
THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY
THE FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL.
Pag. 28/44