Safety Measures - Vitek VT-4270 W Betriebsanweisung

MULTICOOKER VT-4270 W
The main purpose of the multicooker is swift and
quality food cooking.
DESCRIPTION
Body
1.
Control panel
2.
Lid
3.
Lid opening button
4.
Carrying handle
5.
Steam release openings and steam valve
6.
Drip container
7.
Power cord connector socket
8.
Heating element
9.
Temperature sensor
10.
Control panel
Display
11.
«KEEP WARM» mode indicator
12.
«TIME» button
13.
«START» button
14.
«-» button
15.
«DELAYED START» button
16.
«TEMPERATURE» button
17.
«+» button
18.
«KEEP WARM/CANCEL» button
19.
«MENU» button
20.
Cooking program indicators
21.
«DELAYED START» mode indicator
22.
Bowl
23.
Steam cooking basket
24.
Soup ladle
25.
Spatula
26.
Measuring cup
27.
ATTENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install
an RCD, contact a specialist.

SAFETY MEASURES

Before using the unit, read these instructions
carefully. Keep these instructions for further ref-
erence.
Use the unit for intended purposes only, as speci-
fied in this manual. Mishandling the unit can lead
to its breakage and cause harm to the user or
damage to his/her property.
•
Before using the unit, examine the power
cord and the power cord connector located
on the unit body closely and make sure that
IM_VT-4270.indd 3
they are not damaged. Do not use the unit if
the power cord or the power cord connector
is damaged.
•
Before switching the unit on, make sure that
the mains voltage corresponds to the unit
operating voltage.
•
The power cord is equipped with a «euro-
plug»; plug it into the socket with a reliable
grounding contact.
• Do not use adapters for plugging the unit in.
• Make sure that the power cord is properly
inserted into the corresponding connector on
the unit body and into the mains socket.
•
Use only the supplied power cord; do not use
power cords of other units.
•
Use the supplied removable parts only.
•
Place the unit on a flat heat-resistant surface
away from moisture, heat sources and open
flame.
• Place the unit with free access to the mains
socket.
•
Use the unit in places with proper ventilation.
•
Do not expose the unit to direct sunlight.
•
Do not place the unit too close to the wall and
to furniture walls.
•
Make sure that the power cord does not con-
tact with hot surfaces and sharp furniture
edges. Avoid damaging the power cord iso-
lation.
•
Do not touch the power cord or power plug
with wet hands.
•
Do not immerse the unit, the power cord and
the power plug into water or any other liquids.
•
If the unit is dropped into water, unplug it
immediately by taking the power plug out of
the mains socket. Do not put your hands into
water!
• Apply to the authorized service center for
checking the unit.
•
Do not insert foreign objects into the openings
of the unit or between its parts.
•
Do not let foreign objects or edges of clothes
get between the lid and unit body.
•
Do not leave the unit unattended, if you are
not using the unit, switch it off and unplug it.
• To avoid burns, do not bend over the steam
release opening. Be very careful when open-
ing the multicooker lid during and immedi-
ately after cooking. Danger of burns by hot
steam!
•
When the unit is operating in the «Roasting»
mode, do not bend over the multicooker bowl
to avoid burns by splashing hot oil.
3
ENGLISH
20.05.2016 15:06:38