Safety Measures - Vitek VT-4210 BK Betriebsanweisung

MULTICOOKER
The multicooker is intended for cooking and
warming of food.
For your information:
All pictures in this manual are given for refernce only.
The unit shown in the pictures can be different from
the purchased one.
DESCRIPTION
1. Body
2. Control panel
3. Display
4. Lid
5. Lid opening button
6. Carrying handle
7. Steam release openings
8. Moisture collector
9. Power cord connector
10. Heating element
11. Temperature sensor
12. Bowl
13. Steam cooking basket
14. Soup ladle
15. Spatula
16. Measuring cup
Display and control panel
17. Cooking program indicators
18. "SWITCH OFF/KEEP WARM" button with indicator
19. "TIMER" cooking time setting button
20. "DELAYED START" button with indicator
21. "MENU" button
22. "START" button with indicator
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA. To install RCD contact
a specialist.

SAFETY MEASURES

Before using the unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for intended purposes only, as specified
in this manual. Mishandling the unit can lead to its
breakage and cause harm to the user or damage to
his/her property.
•
Before using the unit, closely examine the power
cord and the power cord connector located on
the unit body and make sure that they are not
damaged. Never use the unit if the power cord or
power cord connector is damaged.
•
Before switching the unit on make sure that volt-
age of the mains corresponds to unit operating
voltage.
VT-4210.indd 3
•
Power cord is equipped with "euro plug"; plug it
into the socket with reliable grounding contact.
•
Do not use adapters for plugging the unit in.
•
Make sure that the power cord is properly in-
serted into the corresponding connector of the
multicooker and the socket.
•
Use only the supplied power cord, do not use a
power cord of other units.
• Use the supplied removable parts only.
• Place the unit on a flat heat-resistant surface
away from sources of moisture, heat and open
flame.
•
Place the unit with free access to the mains
socket.
•
Use the unit in places with proper ventilation.
•
Do not expose the unit to direct sunlight.
•
Do not place the unit too close to walls and fur-
niture walls.
•
Provide that the power cord does not contact with
hot surfaces and sharp furniture edges. Avoid
damaging the isolation of the power cord.
• Do not touch the power cord or power plug with
wet hands.
•
Do not immerse the unit, the power cord and
power plug into water and other liquids.
•
If the unit was dropped into water, unplug it im-
mediately. Do not put your hands into water! Ap-
ply to the authorized service center for further
use of the unit.
•
Do not insert foreign objects into the openings of
the unit or between its parts.
• Provide that edges of clothes or foreign objects
do not get between the lid and unit body.
• Do not leave the operating unit unattended, al-
ways switch the unit off and unplug it when you
are not using it.
•
To avoid injury do not bend over the steam re-
lease opening and opened lid.
•
Do not touch the lid during operation of the unit,
open the lid by pressing the lid opening button.
•
Be very careful when opening the multicooker lid.
•
Strictly follow all the recommendations for
amount of dry ingredients and liquids.
• Keep the steam release openings clean, clean
them when they get dirty.
• Never use the unit without the installed bowl and
do not switch it on without products and sufficient
amount of liquid in the cooking bowl.
•
Do not use the multicooker if the silicone gasket
on the inner surface of the lid is damaged.
•
Do not remove the bowl during operation.
•
Do not cover the multicooker during operation.
3
ENGLISH
29.05.2013 14:29:22