Behaviour Upon The Failure And Resetting Of The Bus Power Supply; Maintenance; Setting The Parameters; Programming With Ets - Gewiss GW 10 764 Installationshandbuch

USER INSTRUCTIONS

Behaviour upon the failure and resetting of the BUS power supply

If power fails on the BUS, the device will not carry out any action. When the power supply
resumes, the timed thermostat will reactivate the conditions that were in place prior to
the power failure.
The timed thermostat has a buffer battery, so the date and time are maintained even
when there is a BUS voltage failure (battery lifespan > 2 years).
If the front is connected to the fixed part, the relay contact will remain open after a power
drop and the subsequent resetting of the BUS power supply; if, on the other hand, the
front is detached from the fixed part, the relay will remain in the condition it was in before
being removed.

Maintenance

The device does not require any maintenance. Use a dry cloth if cleaning is required.
Setting the parameters and programming with Easy Controller
Detailed information about how to set the timed thermostat parameters and how to
program with Easy Controller is given in the Programming Manual (www.gewiss.com).

Programming with ETS

The device can be configured with the ETS software. Detailed information about the
configuration parameters and their values is given in the Technical Manual
(www.gewiss.com).
24