Edirol aUDIO cAPTURE ua-5 Erste Schritte Seite 55

Device Manager shows "?", "!", or "USB Composite
Device"
The "Insert Disk" dialog box does not appear
Use the following procedure to re-install the driver.
1.
Turn off the power of your computer, and start up Windows with all USB
cables disconnected (except for keyboard and mouse).
2.
After Windows restarts, use a USB cable to connect the UA-5 to your
computer.
3.
Turn on the power of UA-5.
4.
Click the Windows [Start] button, and from the menu that appears, choose
Settings -> Control Panel.
5.
Double-click the System icon. The System Properties dialog box will
appear.
6.
Click the Device Manager tab.
7.
Check whether you can see an indication of "?Composite USB Device,"
"?USB Device," "!USB Device," or "USB composite device" displayed
below "Sound, Video, and Game Controllers," "Other Devices," or
"Universal Serial Bus Controller." If you find any such indication, select it
and click [Delete].
8.
A dialog box will ask you to confirm deletion of the device. Verify the
contents of the dialog box, and then click [OK]. In the same way, delete all
indications of "?Composite USB Device," "?USB Device," "USB Device,"
and "USB composite device" that you find.
9.
If you find EDIROL UA-5 USB Driver with a yellow "!" or a red "?" displayed
beside it, delete this in the same way.
10. When you have finished deleting the unwanted devices, click [OK] in the
System Properties dialog box.
11. Turn off the power of the UA-5, then delete the driver. (Deleting the special
driver (p. 63))
12. Restart Windows. Then install the driver once again. (Getting Connected
and Installing Drivers (Windows) (p. 15)).
Troubleshooting
55