Installing The Driver - Edirol aUDIO cAPTURE ua-5 Erste Schritte

Installing the driver

The WDM driver and the MME driver can be installed using
the same procedure.
1
With the UA-5 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
2
Log on to Windows as a user with administrative
privileges (such as Administrator).
3
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that
appears, select Settings | Control Panel. In Control Panel,
double-click the System icon.
fig.05-2e_30
4
Open the Driver Signing
Options dialog box.
Click the Hardware tab, and
then click [Driver Signature].
fig.05-3e_30
5
Make sure that "File
signature verification" is
set to "Ignore."
If it is set to "Ignore", simply
click [OK].
If it is not set to "Ignore", make
a note of the current setting
("Warn" or "Block"). Then
change the setting to "Ignore"
and click [OK].
Getting Connected and Installing Drivers (Windows)
If the UA-5 is already
connected to your computer
and a message of "Add New
Hardware Wizard" is
displayed, go to the UA-5
Driver CD-ROM folder named
Driver\Win2000 \WDM or
Driver\Win2000\MME, open
the file Readme_e.htm, and
read the "Troubleshooting"
section entitled "You
attempted to install using
the above procedure, but
were notable to."
If you changed "File signature
verification" in step 5, you
must restore the previous
setting after you have installed
the driver. (–> If you changed
"File signature verification"
(p. 21))
17