Edirol aUDIO cAPTURE ua-5 Erste Schritte Seite 41

Check whether there is sound
Now we will play back the sample data to check whether
connections are correct.
Playing back the sample data
Here we will use standard Macintosh functionality to play
back the sample data. The sample data is found on the UA-5
Driver CD-ROM.
1
Prepare the CD-ROM.
Insert the AUDIO Capture CD-ROM into the CD-ROM drive
of your computer.
2
From the Sample folder of the CD-ROM, drag
Alright onto the desktop to copy it.
fig.05-51e_30
fig.05-52e_30
3
Start up the QuickTime
Player that is included
with the Mac OS.
QuickTime Player is
normally located in
QuickTime within the
Application folder of the
hard disk.
4
Open the sample data.
From the File menu, select Open movie. Then select the
Alright file you copied, and click [Convert].
fig.05-53e_30
5
Play back the sample
data.
Click the Play button.
Was the sample data played back?
If it was played back correctly, this means that the computer
and the UA-5 are connected correctly, and that the drivers
have been installed correctly.
Getting Connected and Installing Drivers (Macintosh)
In order to hear the sample
data, you will need
approximately 30 MB of free
space on the hard disk that
contains the system.
If it did not play back
correctly, refer to
"Troubleshooting" (p. 52) to
determine the reason. This
section contains information
on how to solve problems such
as no sound, or failure to play
back correctly.
41