Edirol aUDIO cAPTURE ua-5 Erste Schritte Seite 39

fig.05-37e_30
9
In order to check that
detection has been
completed, once again
go to "Apple System
Profiler," and select
"Update all
information" from the Command menu.
In the USB area, three audio devices will be displayed.
If these are displayed correctly, driver installation has
succeeded. In the File menu, click Exit to close "Apple
System Profiler".
If they are not displayed correctly, disconnect the UA-5,
wait for about ten seconds, and then repeat the procedure
from step 2.
Next, you will need to make the driver settings.
Settings and checking
Adjusting the sound input/output
fig.05-44e_30
1
From the Apple menu,
select Control Panel –
Sound.
The Sound dialog box will appear.
Getting Connected and Installing Drivers (Macintosh)
39