Getting Connected And Installing Drivers (Windows) - Edirol aUDIO cAPTURE ua-5 Erste Schritte

Getting Connected and Installing
Drivers (Windows)
If you are using a Macintosh computer, please proceed to Getting Connected and
Installing Drivers (Macintosh) (p. 34).
What is a driver?
fig.05-1e_50
A "driver" is software that
transfers data between the
UA-5 and application
software running on your
computer, when your
computer and the UA-5
are connected by a USB
cable. The driver sends
data from your application to the UA-5, and from the UA-5 to your application.
Advanced mode and Standard driver mode
The UA-5 has two operating modes, Advanced mode and Standard mode, and a
different driver is used by each mode.
Advanced mode
The UA-5 will operate in this mode when the rear panel Mode select switch is
turned ON. The special driver included on the UA-5 Driver CD-ROM will be used,
allowing audio to be recorded/played/edited with high quality and stable timing.
In Advanced mode, audio signals can be transferred between the UA-5 and the
computer at a resolution of 24 bits and sampling frequencies of 44.1/48/96 kHz.
Select this mode if you are using an application that allows high-quality audio
recording/playback/editing, such as an application that supports 24 bit audio
(e.g., the Cakewalk series or Cool Edit) or an ASIO-compatible application (e.g.,
Cubase VST or Logic Audio).
Standard driver mode
The UA-5 will operate in this mode when the rear panel Mode select switch is
turned OFF. The standard USB audio driver included with Windows will be used.
In standard driver mode, audio signals are transferred between the UA-5 and the
computer at a resolution of 16 bits and sampling frequencies of 44.1/48 kHz.
Select this mode if you are using an application that uses Window's own
functionality, such as an application that uses the computer's CD-ROM drive to
play back CD-audio, or an application that uses the software synthesizer included
with Windows.
The standard driver that is included with Windows does not support ASIO.
If you want to use the UA-5 in Advanced mode, proceed to Installing the special
driver (p. 16). If you want to use OS-standard driver mode, proceed to Installing
the OS-standard driver (p. 25).
Application
USB port
USB
USB cable
driver
Computer
UA-5
15