Sharp KS-70T50BHH-EE Bedienungsanleitung Seite 15

Rotisserie
skewer insertion hole
skewer handle
skewer tip
skewer
tray on first rack
skewer grid on third rack
Make sure that the oven is not operating while
performing these operations.
skewer insertion hole lid
Use of rotisserie accessories
Pass the skewer through the chicken
and lock the clamps, insert the tip of the
skewer into the hole found at the rear
panel of cavity and make sure that it
completely leans on the frame and fits in
motor shaft. To do this, first you have
to turn the lid to the side,which is found
in front of the skewer insertion hole, as
shown in the figure. After that, fit the
skewer fit the skewer onto the skewer
grid which you will place on the third rack.
Remove the handle from skewer, if it is
installed and close the oven door.
The handle must be atteched only
for removing the food after grilling.
EN - 15