Components - Panasonic TY-ST65PE8 Bedienungsanleitung

Safety precautions
Notes on installing the pedestal
♦ For the display power supply plug, use a power supply outlet that can be reached easily.
♦ Ensure good air flow so that the ambient temperature does not exceed 40 °C (104 °F).
Failure to do this may cause heat to build up inside the display, resulting in malfunction.
♦ Panasonic shall assume no responsibility whatsoever for any damage or accident resulting from improper
assembly or the assembly of the product in any manner not specified in the operating instructions or without
using designated parts.
♦ Remove products that are no longer being used.
Caution:
This pedestal is intended for only Panasonic display models.
Use with other apparatus is capable of resulting in instability causing possible injury.

Components

Note
Properly dispose of the package after unpacking the product.
Base (2)
Left and right parts are identical.
Pedestal tube (2)
Left and right parts are identical.
Overturn-prevention parts
Overturn-prevention belt (2)
Screw (2) (M4 × 15)
Wood screw (2)
■
The images shown in this manual are for illustrative purpose only.
■
Specifications of the product are subject to change without notice.
● Safely store small parts to keep them out of the reach of infants and young children.
● Manage screw tightening torques according to the torques specified in the assembly procedure.
● In tightening screws, use such a tool as a torque screwdriver or torque wrench. Do not use an electric screwdriver
and impact screwdriver.
(Cont'd)
Check that all the parts are accounted for and present in
their designated quantities.
Base installation screw (4)
Display installation screw (4)
(M4 × 28)
(M8 × 40)
17