AEG SANTO 60270-5 KG Benutzerhandbuch Seite 49

4. Re-tighten the screws.
5. Remove the screw masking plugs
from the bottom left-hand side and
refit them on the right-hand side.
6. Unscrew the two screws on the bot-
tom left-hand side.
7. Unscrew the middle hinge and remo-
ve the refrigerator compartment
door by pulling it downwards.
8. With a screwdriver, unscrew the two
masking plugs covering the holes on
the left-hand side and refit them on
the right-hand side.
9. Unscrew the pin from the top hinge
and refit it on the left-hand side.
Remember to fit the washers.
10. Slide the refrigerator compartment
door onto the top pin.
11. Insert the middle hinge into the bot-
tom of the refrigerator compartment
door. Remember to fit the washers.
12. Fully screw up the middle hinge.
13. Fit the freezer compartment door
into the middle hinge.
14. Unscrew the bottom hinge pin and
refit it on the opposite side of the
bottom hinge.
15. Insert the bottom hinge into the bot-
tom of the freezer compartment
door.
16. Fully screw down the bottom hinge.
17. Re-assemble the ventilationgrill (D)
and the plastic cover (C).
18. Unscrew the handles. Refit them on the opposite side after having piercing
the plugs with a punch. Cover the holes left open with the plugs contained
in the documentation pack.
H
D162/a
G
49