Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USING THE TOOL
Slide the cable through the tool head, or open
the head by unfastening the lock.
CHECK THAT THE LOCK IS CLOSED COR-
RECTLY BEFORE CUTTING.
Push on the trigger lightly to move forward the blade to the cable. Check that the cable is
in the correct cutting position, and then push on the trigger, so the blade moves regularly
till the complete cutting of cable.
An audible "click" advise the release of the safety valve, at the maximum pressure force,
securing the tool from over-compression due to a too high cutting effort.
CAUTION: PLEASE, DO NOT PUT YOUR FIN-GERS BETWEEN BLADES. RISK OF
GRAVE CUTS.
PERFORM OTHER CUTTINGS IN THE SAME WAY.
0512 - BCP055G - KW Hydraulik GmbH – Köppelsdorfer Str. 132 – D-96515 Sonneberg – www.kw-hydraulik.de - Seite 13
Slide the battery into the handle of
the press until you hear a click
DO NOT USE THIS TOOL ON LIVE CABLES
Press the release trigger to retract the piston.
Press the button ON/OFF tool. The LED light
up (see LED INDICATIONS).
English
Werbung
Inhaltsverzeichnis
