Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. PARAMETER
7.1 PARAMETER SETTINGS
ENTER INTO THE MENU
•
Turn on the scales. Press and hold
Display will show "Pin" briefly PIN is activated. Press the Pin number to get into the parameter menu.
•
The default PIN number is "0000".
•
Press numeric key 0 four times, display will be shown Pn - - - -
key to confirm, it will enter into the parameter settings and will to show "FO CAL"
•
Press
ENTER TO SELECTED MENU
•
Press
SELECT THE MENU
•
Press
or
RETURN TO WEIGHING MODE
•
Press
for to escape from the menu and exit to weighing mode
ACTIVE PARAMETER
Press CAL switch to enable metrological parameters for to access and change them. CAL switch is locating bottom
!
of the scale.
You need to break metrological seals for to press cal switch. With this action you will loose scale verification.
CAL SWITCH
14
, for to confirm and access to displayed parameter.
for to choose menu.
key during the self test.
USER MANUAL XTA
EN
Werbung
Inhaltsverzeichnis
