Yamaha M7CL Bedienungsanleitung Seite 257

3.2 PARAMETER CHANGE
Reception
This message is echoed if [Parameter change ECHO] is ON.
This message is received if [Parameter change RX] is ON and [Rx CH] matches
the Device number included in the SUB STATUS. When a parameter change is
received, the specified parameter will be controlled. When a parameter request
is received, the current value of the specified parameter will be transmitted as a
parameter change with its Device Number as the [Rx CH].
Transmission
If [Parameter change TX] is ON, and you edit a parameter for which control
change transmission has not been enabled, a parameter change will be
transmitted with the [Tx CH] as its device number.
In response to a parameter request, a parameter change will be transmitted with
[Rx CH] as its device number.
Command rx/tx
F0 43 1n 3E 11 ... F7 rx/tx
RARAMETER CHANGE
F0 43 3n 3E 11 ... F7 rx/tx
PARAMETER REQUEST
4 PARAMETER CHANGE details
4.1 Current Scene, Setup, Backup, User Setup
4.1.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
immediately the data is received.
Transmission
Data will be transmitted with the [Device Number] in [Tx CH] when
[Parameter change Tx] is on and the parameter is not registered on the [control
change assign table].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
Digital mixer
GROUP ID 00111110 3E
M7CL
MODEL ID 00010001 11
DATA 0ccccccc cc
Category
Element no.
DATA 0eeeeeee ee
Element no.
0eeeeeee ee
Index no.
0iiiiiii ii
Index no.
0iiiiiii ii
Channel no.
0ccccccc cc
Channel no.
0ccccccc cc
data
0ddddddd dd
: :
End of exclusive
EOX 11110111 F7
function
M7CL native parameter change
M7CL native parameter request
4.1.2 Format (Parameter request)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
via ParameterChange immediately the data is received.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 3n
Digital mixer
GROUP ID 00111110 3E
M7CL
MODEL ID 00010001 11
DATA Category 0ccccccc cc
Element no.
DATA 0eeeeeee ee
Element no.
0eeeeeee ee
Index no.
0iiiiiii ii
Index no.
0iiiiiii ii
Channel no.
0ccccccc cc
Channel no.
0ccccccc cc
End of exclusive
EOX 11110111 F7
4.1.3 Data category
DATA CATEGORY
0x01 00000001
4.2 Function call – library store, recall –
4.2.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding parameter will be changed
immediately the data is received.
Transmission
Data will be transmitted with the [Device Number] in [Tx CH] when
[Parameter change Tx] is on.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
Digital mixer
GROUP ID 00111110 3E
M7CL
MODEL ID 00010001 11
OTHER DATA
DATA CATEGORY 00000000 00
(ASCII CODE)
FUNCTION NAME 01001100 "L"
(ASCII CODE)
01101001 "i"
(ASCII CODE)
01100010 "b"
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
number High
DATA 0mmmmmmm mh
number Low
0mmmmmmm ml
channel High
0ccccccc ch
channel Low
0ccccccc cl
End of exclusive
EOX 11110111 F7
M7CL Bedienungsanleitung
MIDI-Datenformat
NAME
Current Scene/Setup/Backup/
User Setup Data
257