Sony pcga-ddrw1 Bedienungsanleitung Seite 23

1
Turn the Digital Video Camera Recorder's power on, and set
it to video playback mode.
For details of Digital Video Camera Recorder operations, refer to your
Digital Video Camera Recorder manual.
2
Connect the supplied i.LINK cable to the DV input/output
terminal on the Digital Video Camera Recorder.
3
Connect the other end of the i.LINK cable to the i.LINK
connector on the back of the drive.
Digital Video
Camera Recorder
VAIO notebook peripheral
cable (80 cm)
Note
Do not connect any i.LINK equipment other than a Digital Video Camera Recorder
to the i.LINK connector on the drive.
4
Click the [Start] button, and then click [My Computer] to
verify that
been added in the "My Computer" window.
DV input/output terminal
i.LINK cable
Notebook
(Sony DV camcorder or other equipment) has
i.LINK cable
i.LINK connector
Continued on next page
GB
23