Connecting The Drive - Sony pcga-ddrw1 Bedienungsanleitung

Connecting the Drive

The procedure for connecting this drive varies depending on what notebook
you are using.
• If the notebook is equipped with a VAIO notebook peripheral
device DC OUT connector (see page 17)
If the notebook is equipped with a VAIO notebook peripheral device DC
OUT connector, use the supplied VAIO notebook peripheral cable (80
cm) to connect the drive to the notebook. If this method is used, power
for the drive is supplied by the notebook, allowing you to use the drive in
locations without a power outlet.
If you use a Digital Video Camera Recorder, you can connect it to the
drive using the supplied i.LINK cable (see page 21).
i.LINK connector
• If the notebook is not equipped with a VAIO notebook
peripheral device DC OUT connector (see page 19)
If your notebook is not equipped with a VAIO notebook peripheral
device DC OUT connector, use the supplied i.LINK cable to connect the
drive to the notebook. In this case, the supplied AC adapter and AC
power cord must be used.
If you use a Digital Video Camera Recorder, you can connect it to the
drive using an i.LINK cable available separately (see page 21).
VAIO notebook peripheral device
DC OUT connector
Continued on next page
GB
15