Sony pcga-ddrw1 Bedienungsanleitung Seite 20

1
2
3
4
GB
20
Turn on the power of the notebook.
Connect the AC power cord to the supplied AC adapter then
plug the AC power cord into an AC outlet and plug the cable
of the adapter into the DC IN connector on the drive.
The green POWER indicator of the drive lights up.
Connect the supplied i.LINK cable to the i.LINK connector on
the rear of the drive.
i.LINK cable
Connect the other end of the supplied i.LINK cable to the
i.LINK connector on the notebook.
The drive is detected and identified by the notebook.
i.LINK cable
z
Hint
When connecting this drive to your notebook for the first time, it takes a moment for
the drive to be detected.
i.LINK connector
i.LINK connector