R82 Wombat Living Handbuch Seite 35

Maintenance responsibilities table
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure to
maintain a device in accordance with the instructions may invalidate the device's warranty. Further-
more, failure to maintain a device may compromise the clinical condition or safety of users and/or their
EN
caregivers.
Frequency
1st Day
Daily
Weekly
Monthly
Annually
Warewashing machine
This product can be washed at 60° using a mild detergent for 15-20 minutes in a warewashing washing
machine designed for medical devices. Use the machine's drying function to dry the product. Remove all
accessories, cushions and electrical parts including battery, handset and actuator before washing the
main product. Clean the accessories separately. Please allow the product to dry before reuse.
Washing
The cushion covers can be washed at 60° using a mild detergent in a washing machine. It is not recom-
mended to wash the foam.
Accessories and spare parts
The products from R82 can be supplied with a variety of accessories which comply with the needs of the
individual user. Spare parts can be ordered on request. Find the specific accessories on our website or
contact your local dealer for further information.
Service interval
A detailed inspection of the product must be made every 12 months (every 6 months for heavy users)
and every time the product is reissued for use. The inspection should be carried out by a technically
competent person who has been trained in the use of the product.
Contact your local dealer for instructions on repairs.
The lifetime of this product in normal use is 5 years if all maintenance and servicing is carried out in
accordance with the manufacturer's instructions and demonstrably recorded.
ENGLISH
Description
Read the User Guide carefully before use and store it in a safe place for
future reference
Store the enclosed tools on/at the product
Use a dry cloth to clean the product
Visual inspection. Repair or replace any damaged or worn-out parts
Ensure that all fasteners are in place and fitted correctly
Check all fittings and buckles for signs of worn out parts
Be aware of any max mark indications before adjustment
Check that all castors are moving freely and that all castor locks/brakes
are easily activated
Wipe off any residue and dirt from the product using a cloth with warm
water and a mild detergent and dry before use
All nuts and bolt on this product must be checked and tightened to avoid
failures
Oil the swing-away parts. We recommend you use a professional lubri-
cant system
Inspect the frame for cracks or signs for worn-out parts and carry out
annual service. Never use a product which appears to be substandard
or faulty
34