Maintenance - MA lighting onPC command wing Bedienungsanleitung

Cleaning
The MA onPC wing only requires minor attention. Disconnect electric power supply prior to cleaning.
Clean the surface only with dry soft cloth. Do not use any liquid cleaner or compressed air. Solely
the flexible hand rests are allowed to be cleaned with a mild cleaner and a damp cloth. Do not use
any solvent. Check ventilation holes are clear.
Depending on the environment we recommend to clean the console professionally every 2 – 5
years.
Marking and cleaning the magnetic fader labels.
Use a felt marker (EDDING 140S ohp marker, permanent) for the magnetic fader labels. And clean
them with ethyl alcohol – after this the label is ready for use again.

Maintenance

Electric shock warning: The unit should be serviced by qualified personnel only, as live parts may be
exposed when opening and/or removing coverings; besides others, you run the risk of suffering an
electric shock.
MA onPC
command wing
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
41