MA lighting onPC command wing Bedienungsanleitung Seite 30

Data
Current:
Power cable:
Required plug connector:
Power input:
90 – 264 V ~ 50 / 60 Hz (USA, Canada
Automatic operation, no switching necessary!
Caution: Use the indentical electric circuit, repsectively the identical
protective earth potential for PC (onPC) and MA onPC command
wing or PC and MA onPC fader wing, otherwise damages of
hardware and / or malfunction can result from connecting via the
USB cable. That means, both units (PC and MA onPC command
wing or PC and MA onPC fader wing) must be connected to the
same power socket or (if guaranteed) to the same electric circuit
(portective earth and potential identical)!
Only adequately protected cables may be used ( min. Ø = 3 x
1,0mm²). Cable and socket are not included in delivery.
Must meet the standard in the respective country. The plug
connector is not included in delivery.
The socket should be serviced by qualified personnel only!
MA onPC command wing
MA onPC fader wing
approx. 40 VA
approx. 40 VA
MA onPC
command wing
1
MA onPC
fader wing
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
28