MA lighting onPC command wing Bedienungsanleitung Seite 37

Connectivity
1
1) Mains switch ON/OFF (0) and power supply (IEC 22) 90 V – 264 V ~ , 50 / 60 Hz
- Automatic operation, no switching necessary!
Cable and connector are not included in delivery and must meet the local requirements.
Caution! Use the identical electrical circuit, respectively the identical protective earth conductor for PC
(onPC) and MA onPC command wing or MA onPC fader wing; otherwise damages of hardware and/or
malfunction can result from connecting via USB cable. That means, both units (PC and MA onPC
command wing or PC and MA onPC fader wing) must be connected to the same socket or (only if
guaranteed) to the same electric circuit (protective earth identical)!
2) USB/PC for connection with PC or notebook (with onPC2 installed) USB –cable with ferrite core
included in delivery
3) USB/CMD for connection with MA onPC command wing
4) USB "Power only" for connection of desk lamp (100mA / 0,5W)
5) 4x DMX - OUT (5 pin)
6) Kensington Lock (anti theft device)
2 3 4 5 6
MA onPC
command wing
1
MA onPC
fader wing
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
35