General Safety Instructions - MA lighting onPC command wing Bedienungsanleitung

General Safety Instructions

Read all the instructions in the user's manual, especially the
safety requirements, see Safety requirements
Follow all instructions. Keep the user's manual for future use.
Follow all cautions and warnings indicated on the unit.
Disconnect the mains plug before cleaning the unit; do not
use any liquid or spray cleanser. Clean with a dry cloth.
Do not use the unit near water. Do not expose it to a humid
environment. Do not spill any liquid over the unit.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Do not block or cover any ventilation slots in the housing -
they are necessary for the essential airflow within the unit and
protect it against overheating. Do not install the unit into a
frame unless sufficient ventilation is guaranteed. Install in
accordance with the manufacturer's instructions.
Do not insert any objects through the slots of the unit, as
these could get in contact with live parts or could cause short
circuits. This could cause a fire and/or an electric shock.
Do not place the unit on unstable surfaces. It may fall and
become damaged.
Do not place any objects on the power cord. Protect it from
being walked on or pinched particularly at the plugs and the
point where they exit from the apparatus.
If using an extension cord, make sure the rated output of all
units connected in aggregate does not exceed the maximum
rated output of the extension cord.
If the power cord or the mains plug is damaged, let a qualified
technician replace it immediately.
Only use power cords which are safety-marked for purpose.
All service work should be exclusively performed by qualified
service technicians.
Do not use any high-power walkie-talkies or cellular phones
near the unit.
The unit is provided with a safety plug. This plug can only be
used with safety sockets. These precautions should by all
means be followed. If the plug should not fit into a given
socket (e.g. the case with old sockets), the socket should be
replaced by an electrician.
Do not ignore the safety purpose of the grounding-type
plug. A grounding type plug has two blades and a third
grounding connection. The third connection is provided
for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement with
an appropriate outlet.
As with all industrially manufactured goods, the use of
substances that induce an allergic reaction such as
aluminium cannot be generally excluded. If you
develop an allergic reaction (such as a skin rash,
frequent sneezing, red eyes or respiratory difficulties),
consult a physician immediately to determine the
cause.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped. Besides potential harm to others,
you run the risk of suffering an electric shock.
If one of the following conditions occurs, please
disconnect the mains plug and call your dealer or
technical support!
- Power cord or mains plug is damaged or worn.
- Liquid penetrated the unit.
- The unit was exposed to rain or high ambient
humidity.
- The unit does not function properly, even when
following all the instructions in the manual. Only
manipulate the controls as stated in the manual,
wrong settings on the controls may damage the unit.
- The unit has fallen and the housing damaged.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE
MA onPC
command wing
1
MA onPC
fader wing
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
31