Funkwerk elmeg CS290-U Bedienungsanleitung Seite 14

Automatic exchange line access (softkey »
•
With direct exchange line access, you do not have to dial the line access digit for conduc-
ting outgoing calls.
Line access digit (softkey »
•
Line access digit for the pabx; the line access digit is placed automatically in front of the
number of the caller for the external calls.
Setting the User Interface
Begin as follows:
Connecting / using a headsets (softkey »
Configuring a headset; For headset operation, use the function key »
want to use the function key »
Default setting during a connection
•
Select whether in the initial settings »
call;
Programming function keys
Begin as follows:
Direct dial buttons (softkey »
•
Programing a telephone number for a specific function button.
Function buttons (softkey »
•
Select the function key that you wish to assign a new function to . Confirm your selection
•
O
by pressing
Enter the desired internal extension number »
•
Possible settings and allocation options are described in the detailed operating instructions
provided on the CD.
Deactivating the extended configuration mode
Enter the code number »**46782550##« (Vanity-format »**INSTALL0##«).
Release for remote access of the phone is effected for 30 minutes.
If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the
ISDN connector of the phone or by switching off or resetting the pabx), the extended configura-
tion mode will be automatically switched off.
Setting the display language
You can select the language of your display.
10
«)
extern
F
-»
-» «-
adjust use
headset
auto-answer
F
-» t«--»
adjus direct
« oder »
list
function
(an extension key in this example).
«)
ln. access
«
«)
«.
« or » « is possible during an ongoing
DTMF keypad
«
«)
new
«)
prog new function
1_:-
1_ / Extension key
Number>
« and confirm by pressing
Number
«. You may also
headset
{}
O
.