Operation And Functions - Schubert Etude 450 USB Handbuch

Operation and Functions

Press [Power ON/OFF], LCD screen will turn on and show the current tone, tempo, volume and other status.
The luminous function is enabled by default.
Key light
With the luminous keyboard, when under the modes of playing, luminous keyboard three-step training, demo
song playing and USB-MIDI music input, the keyboard will light on for instruction. The luminous function is
defaulted to be enabled, press [KEY LIGHT] to enable or disenable the luminous function.
Master volume adjustment
Press [Master Vol ] or [Master Vol ] to turn up or turn down the master volume. Press [Master Vol ] and
[Master Vol ] simultaneously to reset your keyboard to the default values.
The master volume can also control the rhythm volume and the chord volume.
Timbre selection
The Keyboard provides 460 timbres, from "000" to "459", for your selection. When starting the keyboard, the
timbre selection function will be activated automatically, and ‚'Tone" will show on the screen. In the absence of
"Tone", Press [TIMBRE] to enable to tone selection function. The Timbre is defaulted to be "000", and it can be
adjusted by pressing the corresponding number buttons or pressing the "+" / "-" buttons.
Keyboard Percussion
Press [Keyboard Percussion] to activate the percussion function. Under this mode, users can play the keyboard
to produce corresponding percussions. Press this button again to disenable the keyboard percussion function.
Playing demos
65 demos are stored in the keyboard, from "000" to "064", for your selection. Press [Demo Song], and the
demo song will play in order, and you can press the "+" / "-" buttons to select other demo.
When playing the songs, you can press the number buttons to select the corresponding demos, and the se-
lected demos will play in a loop.
20